96 mhz saw filter 20 mhz bandwidth part number: SF0096BA03001S spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0096BA03001S rev a 22-feb-2010 ecn 36650 page 1 of 3 description ? 96 mhz saw bandpass filter with 20 mh z bandwidth for wcdma applications. ? 13.3 x 6.5 mm smp. ? rohs compliant. typical performance horizontal: frequency : 8 mhz/div vertical from top: relative magnitude : 10 db/div relative magnitude : 1 db/div phase linearity: 5 deg/div group delay : 50 ns/div s11 (56 to 136 mhz) s22 (56 to 136 mhz) 50. ns/"
96 mhz saw filter 20 mhz bandwidth part number: SF0096BA03001S spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0096BA03001S rev a 22-feb-2010 ecn 36650 page 2 of 3 specification paramete r min t yp max units center frequency ( fc) 1 - 96 - mhz insertion loss 2 - 14 15.5 db 0.6 db bandwidth 3 20 22.8 - mhz 40 db bandwidth - 31.5 35 mhz amplitude ripple (86 to 106 mhz) - 0.6 0.8 db p-p amplitude ripple in any 3.84 mhz band (86 to 106 mhz) - 0.3 0.6 db p-p phase linearity (86 to 106 mhz) - 3 7 deg p-p group delay variation (86 to 106 mhz) - 20 50 ns absolute delay - 0.89 - us rejection (0.3 to 10 mhz) 3 25 50 - db rejection (10 to 68 mhz) 3 45 50 - db rejection (68 to 78.5 mhz) 3 40 45 - db rejection (113.5 to 124 mhz) 3 40 45 - db rejection (124 to 160 mhz) 3 45 52 - db rejection (160 to 500 mhz) 3 25 27 - db ambient temperature 20 25 30 ? c temperature coefficient of frequency - -90 - ppm/ ? c source and load impedance 50 ? notes: 1. average of lower and upper 3 db frequencies (3 db measured from peak). 2. average loss over 86 to 106 mhz. 3. reference 0 db at insertion loss level. maximum ratings parameter min max units storage temperature range -40 85 ? c operating temperature range -40 85 ? c operating input power level - +10 dbm matching circuit typical component values: notes: 1. recommend use of +/- 2% tole rance components. minimum q=40. 2. component values are for reference only and may change depending on board layout. lp1 = 820 nh ls2 = 68 nh ls1 = 82 nh input 50 ? single-ended output 50 ? single-ended 11 5 12 6
96 mhz saw filter 20 mhz bandwidth part number: SF0096BA03001S spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0096BA03001S rev a 22-feb-2010 ecn 36650 page 3 of 3 package outline suggested footprint iso 9001 registered all specifications are believed to be accurate and reliable. howe ver, spectrum microwave reserves the right to make changes wit hout notice. ? 2010 all rights reserved. units: mm tolerances are 0.15 mm except for the overall length, width and pad dimensions, which are nominal values. pad configuration: input: 11 input return: 12 output: 5 output return: 6 ground: all other pads package material: body: al 2 o 3 ceramic lid: kovar, ni plated terminations: au plating 1 m min, over a 1.3-8.9 m ni plating
|